 ID2000 Injectors; Injector Dynamics 2000cc | |
I've been getting a few PM's so I figure I'll post my experience and tuning data.
So first off let me say these are amazing injectors, easy to tune and are very precise when it comes to running E85. Now 93 octane is a bit more difficult to make run on a daily driver but I finally got them dialed in. On both fuels these give plenty of volume and are very good about dialing in what you want.
Now as far as numbers go remember mine are on a 2.4L running 9.5:1 compression so yours may differ a bit.
Idaho 93 octane
Scaling = 1828
E85 (Could be winter blend not sure yet)
Scaling = 1271
Latency; (Same with both fuels)
2.205
1.065
0.990
0.720
0.480
0.360
0.300
Now along with this I've adjusted my open loop settings to accommodate the 2000's;
500 = 40
1000 = 40
1500 = 40
2000 = 80
2500 = 80
3000 = 80
3500 = 80
4000 = 60
4250 = 30
From there on is zero
I've got my minimum IPW set @ 1.096
If anything changes or I come up with more to help I'll post more up, also if your set up is a little different and your numbers work better post up.
| 
Linear Mode
